Skip to main content
Download Specifications

LIFEPO4 LITHIUM BATTERY

S12-100LFP
Series S-Series LFP Warranty See Warranty Terms
Volts 12 Design Grp 24
Terminal Type M8
Included Hardware M8 stainless bolts & washers
Charge
Charge Voltage Range 14.0 - 14.6V
Recommended End of Discharge Voltage 12.0 V
End of Discharge Protection Voltage 10.0 V
Recommended Charge Voltage 14.4 V
Recommended Charge Current
-20~0°C (-4-32°F) 0.1C 10A
0~10°C (32-50°F) 0.2C 20A
10~35°C (50-95°F) 0.5C 50A
35~50°C (95-122°F) 0.2C 20A
Charge Mode:
  • Charge at recommend voltage & current by temperature until charge current drops to ≤ 0.05C (CC,CV)
  • DO NOT USE TEMPERATURE COMPENSATION
  • No BTS (Battery Temperature Sensor)
Max Continuous Charge Current 100 A
Max Continuous Discharge Current 100 A
Surge Current Limit 800 A (300ms)
Charge Temperature Range -20°C~55°C (-4~131°F)
Discharge Temperature Range -20°~60°C (-4~140°F)
Storage Temperature Range -5°~45°C (23~113°F)
Capacity
Nominal Capacity 100 AH
Total Energy 1.28 kWh
Nominal Voltage 12.8 V

Safety

  • Cylindrical LiFePO4 cells [ITR26-70/40E 4Ah, 26700] (UL1642)
  • IEC62133 (cell), IEC62619(cell), UN38.3 (cell/pack)
  • ROHS (cell), CE system certification, IP65 Rating

Design

  • Standard-size (BCI) ABS container for easy VRLA replacement
  • Fast charge/discharge performance
  • Display & integrated controls
  • Visual state-of-charge (SOC)
  • External fuse access
  • Internal heating for -20°C (-4°F) to 0°C (32°F) charging *
  • Bluetooth Connectivity & dedicated IOS & Android App
  • Maintenance-free operation

* Note: When connected in series, internal heating may increase charge imbalance requiring external rebalancing.

Refer to R-Series & S-Series LFP Battery Operating Manual

Battery Management System (BMS)

Integrated hardware BMS inside

  • Independent charge & discharge protection
  • Balance Protection
  • Short-Circuit Protection, Over-Voltage Protection, Low-Voltage Protection, Over-Current Protection, Low-Temperature Protection, Over-Temperature Protection

12V LFP Profile

Specifications
Weight 11.5 kg 25.4 lbs
Length 266 mm 10.47"
Width 177 mm 6.97"
Height 228 mm 8.98"
Height Incl. Term. 234 mm 9.25"
Product measurements & weights are calculated based on sample data. Individual specifications are subject to vary due to the manufacturing process & battery components.
Container ABS
Cover ABS
Handles Integrated Top Mount
Internal BMS Model 4S100ATX-V2
Expected Cycle Life >6000 @ 80% DOD, >3000 @ 100% DOD
Series Connection 4 UNITS MAX (48V)
Parallel Connection 4 UNITS MAX (48V) or 6 UNITS MAX (12V)
Connectivity

Up to 4S4P (in 48V configuration) or 1S6P (in 12V configuration)

Detailed Illustration

Rev.#2 | July 2024