LIFEPO4 LITHIUM BATTERY |
S48-100LFP ESS HE |
|
|
| Series | S-SERIES LFP ESS | Warranty | See Warranty Terms |
|---|---|---|---|
| Volts | 48 | Design | Rack Mount |
| Terminal Type | M8 | ||
| Size & Thread | M8 | ||
| Cables | Busbar included | ||
| Charge | Discharge | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Charge Voltage Range | 55.2V - 57.6V | |||||||||
| Recommended End of Discharge Voltage | 48.0 V | |||||||||
| End of Discharge Protection Voltage | 44.8 V | |||||||||
| Recommended Charge Voltage | 56.0 V | |||||||||
| Recommended Charge Current | ||||||||||
|
||||||||||
| Charge Mode: Closed Loop: Follow inverter setup. Open Loop: Charge at recommended voltage & current by temperature following directions in the S48-100LFP ESS HE Battery Operating Manual. |
||||||||||
| Max Continuous Charge Current | 100 A | |||||||||
| Max Continuous Discharge Current | 100 A | |||||||||
| Charge Temperature Range | -20°C~55°C (-4~131°F) | |||||||||
| Discharge Temperature Range | -20°~60°C (-4~140°F) | |||||||||
| Storage Temperature Range | Recommended: -5°~45°C (23~113°F) Limit: -25°C~55°C(-13~131°F) | |||||||||
| Capacity | |
|---|---|
| Nominal Capacity | 100 AH |
| Total Energy | 5.12 kWh |
| Nominal Voltage | 51.2 V |
Safety & Certification
- Prismatic LiFePO4 cells [100Ah prismatic cell] (UL 1973)
- IEC62619 (cell), UN38.3 (cell/pack)
- ROHS (cell), IP52 Rating
Design
- Up to 15 parallel connectivity*
- Battery status indication
- CAN bus & RS-485 connectivity
- External breaker access
- PC & Mobile App Connectivity – Set up in mobile app
- Heating for low temperature operation [-20°C (-4°F) to 0°C(32°F) charging]
- Compatible with 19″ Rack Standard
- Install up to 15 units per system
- Options stacking brackets available
Battery Management System (BMS)
- Integrated hardware BMS inside
- Independent charge & discharge protection
- Short-Circuit Protection, Over-Voltage Protection, Low-Voltage Protection, Over-Current Protection, Low-Temperature Protection, Over-Temperature Protection
- Secondary protection – Internal BMS Switch & Relay, External Breaker Access
*UK & European model
| Specifications | |||
|---|---|---|---|
| Weight | 42.5 kg | 93.7 lbs | |
| Length | 4800 mm | 18.9" | |
| Width | 4220 mm | 16.6" | |
| Height | 133 mm | 5.24" | |
| Product measurements & weights are calculated based on sample data. Individual specifications are subject to vary due to the manufacturing process & battery components. | |||
| Container | Steel | ||
|---|---|---|---|
| Handles | Built-in | ||
| Internal BMS Model | 48100-5G-UL | ||
| Expected Cycle Life | >6000 @ 80% DOD (.5C @ 25°C, 80% EOL), >3500 @ 100% DOD (1C @ 25°C, 70% EOL) | ||
| Series Connection | No | ||
| Parallel Connection | 15 | ||
| Connectivity | 1x Link In (internal), 1x Link Out (internal) 1x CAN bus (external) , 1x RS-485 (external) Refer to S48-100LFP ESS HE Battery Installation Guide for compatible inverters, communication types & protocols. |
||
